Wang, H., Zhou, J., Zhao, T., Tao, Y.
57031081700;56510510800;56941245600;56604577500;
Springback compensation of automotive panel based on three-dimensional scanning and reverse engineering
(2016) International Journal of Advanced Manufacturing Technology, 85 (5-8), pp. 1187-1193. 被引用 8 次.
https://www.scopus.com/inward/record.uri?eid=2-s2.0-84946120172&doi=10.1007%2fs00170-015-8042-x&partnerID=40&md5=d3a5e4e807ca7a7409644ce78db116a3

DOI: 10.1007/s00170-015-8042-x
归属机构: College of Materials Science and Engineering, Chongqing University, Chongqing, 400044, China
摘要: A new method to compensate for the springback of a formed part was introduced in this study. The development of stamping tools for the rear reinforcement plate of a door panel was used for the experiment. A three-dimensional (3D) scanner was utilized to scan the formed part. Compared with the design model, the deviation and springback angle of the formed part were obtained. Furthermore, the inspection results measured by a traditional special fixture were compared with the results of the 3D scanner. Finally, the 3D scanning data were used to compensate tool surfaces, and the tools were remanufactured on the basis of the compensated tool surfaces. The final stamping parts were measured by a special fixture after die tryout. The inspection results demonstrated that 15 of 18 measuring points can satisfy the geometrical tolerances, thus indicating that the qualified rate of this product can reach 83.33 % the first time the springback is compensated by using 3D scanning method. The results prove that 3D scanning data is more accurate and complete than the traditional method, and the springback compensation by this method can effectively reduce die tryout time. © 2015, Springer-Verlag London.
作者关键字: Automotive panel;  Springback compensation;  Stamping;  Three-dimensional scanning
索引关键字: Fixtures (tooling); Reverse engineering; Stamping, Automotive panel; Design modeling; Geometrical tolerances; Measuring points; Special fixtures; Springback compensation; Three-dimensional scanning; Threedimensional (3-d), Scanning
通讯地址: Wang, H.; College of Materials Science and Engineering, Chongqing UniversityChina; 电子邮件: wangxiuhui0412@163.com
出版商: Springer-Verlag London Ltd
ISSN: 02683768
CODEN: IJATE
原始文献语言: English
来源出版物名称缩写: Int J Adv Manuf Technol
文献类型: Article
来源出版物: Scopus